KE Fibertec Weaving Mill
KE Fibertec is the only manufacturer of textile
ducts worldwide to have their own weaving mill - KE Fibertec
The weaving mill was established in 1972 and is today run by Mr
Frank Hansen who is the manager and third generation of the family
KE Fibertec Væveri exclusively manufactures fabrics for textile
duct ventilation which is a unique situation on the global market
and which gives us a valuable know-how on these materials for the
benefit of our customers.
To have our own weaving mill just across the parking lot gives
us a very flexible cooperation partner who can meet our demands and
requests on especially quality control and supply security.
KE Fibertec Væveri has very strict demands on suppliers of yarn,
and all raw materials are subject to extensive input control to
ensure that the permeability is unchanged even after many
- Colour may vary no more than ∆E=1
- The textiles may shrink no more than 0,5%
- Maximum 1% spinning oil in the yarn (standard for raw materials
After input control the fabrics are woven on 16 looms in total -
rapier looms and the more upgraded air jet looms.
The clip is from the KE Fibertec corporate film. To see it in
full length please go to the about KE Fibertec page.
To be able again to control the shrinkage, the fabrics are heat
set, i.e. heated in a special oven at 170°C. At this stage the
material can shrink maximum 0.5% after washing.
Before the fabrics leave the weaving mill, they undergo inspection
on a light table to check for faults such as stains, and the
permeability is checked as well.
A barcode enables us to monitor the fabric which gives us full
traceability in relation to production date, permeability, etc. -
from reel to finished product delivered and installed at the end
All materials are 100% polyester available in 3 different
- Trevira CS polyester (DS approved, fire retardant - B-s1,
- Polyester FR (fire retardant - LDC FR)
- Ordinary polyester
Further, we supply special materials such as Nomex and
antistatic Trevira CS.
KE Fibertec Væveri manufactures 7 different types of
"permeability" and has a range of 89 different product items.